The 11th Edition of © 2008 IHS Global, Inc.
Bryan R. Fischer and Advanced Dimensional Management LLC were selected by IHS Global, Inc. to revise the next edition of the “Drawing Requirements Manual” (or DRM.) We spent over a year updating this classic and exhaustive reference on engineering standards and engineering drawing practices. We painstakingly reviewed the many standards that have been revised and replaced since the 10th Edition, and updated the DRM to reflect the current requirements. Many changes have taken place in industry since the 10th Edition, so our goal was to update the DRM to reflect how business is being done today and to follow current trends toward the future.
The biggest change was to address the prevalence of CAD data and automated processes as part of the design, inspection, manufacturing, and assembly processes, and updating the material to reflect the prevalence and many uses of 3D solid models in the modern workplace.
Bryan wrote a completely new chapter based on the ASME Y14.41-2003 standard (and its derivative ISO 16792:2006), which deal with 3D Solid Modeling and Using Digital Data and Annotated Solid Models as Design Deliverables. The latest revision of MIL-DTL-31000 (Revision C) also addresses digital data and using Annotated 3D Solid Models in product development, and the specific requirements from MIL-DTL-31000C are also addressed in this new chapter on 3D Solid Modeling. The new chapter includes new material developed specifically for the DRM, including an exclusive interpretation and expansion of ASME Y14.41-2003, and contains additional definitions, techniques, and real-world application guidelines not addressed in ASME Y14.41-2003 or anywhere else.
Another major change in the 11th Edition of the DRM was to address changes in the U.S. Government’s Acquisition Reform Policies. A major reversal in Government Acquisition Policy was implemented in 2005. This reversal has the potential to affect acquisition contracts issued by all branches of the DoD, other Government Agencies, and all contractors working to or providing materiel for these contracts. Extensive material has been added to the DRM to address these changes and the current way business is done in these environments. This is a must-read for everyone involved.
The DRM 11th Edition is sold by IHS Global, Inc. It is available as a bound and printed book, as an e-book on DVD, as an online subscription, and in conjunction with the applicable ASME Y14 series standards. Follow this link or contact IHS at the number below for more information. Please mentionedSalesman Code 127 and make sure to let them know you were referred by Bryan Fischer.
- Section 1 Specifications and Standards Data
- Section 2 Drawing/Data Elements & Management
- Section 3 Drafting Practices
- Section 4 Types of Engineering Drawings
- Section 5 Dimensions and Tolerances (including GD&T, ASME Y14.5)
- Section 6 Engineering Drawing Format
- Section 7 Drawing & Part Number System
- Section 8 Drawing Titles
- Section 9 Drawing Notes
- Section 10 Parts List Preparation
- Section 11 Identification Marking
- Section 12 Thread Representation
- Section 13 Surface Texture
- Section 14 Welding Symbology
- Section 15 Protective Coatings
- Section 16 Casting Drawings
- Section 17 Forging Drawings
- Section 18 Facility Drawings
- Section 19 Tooling Drawings
- Section 20 Packaging Drawings
- Section 21 Sheet Metal Drawings
- Section 22 Electrical and Electronic Drawings
- Section 23 Drawing Change Procedures
- Section 24 Abbreviations
- Section 25 Definitions
- Section 26 Digital Data Sets & 3D Solid Modeling (ASME Y14.41)
- Appendix M1 International System of Units (SI)
- Appendix M2 Metric Conversion of Units
- Appendix M3 Writing SI
- Appendix M4 Conversion of Dwg – Inch to Metric
- Appendix M5 Misc Metric Information
- Appendix M6 Metric Glossary
- Appendix A1 Past Practices – Manual Drafting Techniques
If you would prefer to order by phone, please call the number below and be sure to mention Salesman Code 127 and tell them you were referred by Bryan Fischer.
Sr. Retail Sales Manager – IHS
Salesman Code 127
800-854-7179 EX 7931
Quotes from the Author:
“When considering ASME Y14.41-2003 and using 3D Solid Model Data, I realized that industry needed additional guidance beyond the current standard. Based on my experience, more coverage and examples were needed for separable and inseparable assemblies, application of GD&T on annotated models and axonometric drawing views, and additional insight into the background and history of Solid Modeling and Design Deliverables. One area where I deviated from ASME Y14.41-2003 was in how to deal with the situation where both a drawing and a model are used as part of a Design Deliverable, and how to deal with conflicts between them, which led to the concept of the Design Master. None of this is addressed in the standard, as it merely requires all data to be in agreement. However, in the real world, very frequently this does not occur.There are differences between the drawing and the model, both intentional and unintentional. The new chapter in the DRM andAdvanced Dimensional Management LLC’s new Advanced Applications of Solid Modeling Course, which is based on the new chapter, provide guidance and clarify best practices in these murky waters.
To follow in the footsteps of original author Jerry Lieblich was both an honor and a privilege. I did my best to retain the flavor and intent of the DRM, as many long-time readers urged me to maintain the familiarity and usefulness of their favorite engineering reference manual.”
Bryan R. Fischer, Advanced Dimensional Management LLC
Quote from Mechanical Engineering Magazine, November 2008.
“When we set out to create the 11th Edition of the Drawing Requirements Manual, we set our sights high. Our goal was to align the Drawing Requirements Manual with the current revisions of the many standards it covers, and to align it with current and forthcoming trends in industry, such as the exciting new chapter on 3D Solid Modeling and Using Digital Data and Annotated Models as Design Deliverables. This revision is a quantum leap forward in scope and coverage.”
Bryan R. Fischer, Advanced Dimensional Management LLC
We offer 1- and 2-day training courses based on ASME Y14.41-2003 and Section 26 of the DRM. Our course is called Advanced Applications of Solid Modeling: Using Solid Models and Digital Data as Design Deliverables, and is part of the many courses we offer. Please contact us here at Advanced Dimensional Management LLC for more information.
Bryan R. Fischer is President of Advanced Dimensional Management LLC in Sherwood, Oregon, offering leading-edge training and consulting in Dimensioning and Tolerancing, GD&T, Tolerance Stackup and Analysis, Dimensional Management, Design, Standards and Quality.
Bryan and our other trainers are ASME Certified Senior Level GD&T Professionals. Bryan and others are members of several ASME sub-committees. Bryan a member of the ASME Y14.5 Sub-committee Support Group, the US TAG to ISO TC213 which develops ISO GPS (GD&T, etc. standards, and directly involved in developing the ASME Y14.5 standard and ISO 1101 and 5459 standards. He is recognized as a leading authority in the theory and application of Dimensioning and Tolerancing, GD&T, Tolerance Analysis and Stackups and Dimensional Management.
He is a published author, having written several books on Geometric Dimensioning and Tolerancing, Tolerance Stackups and Tolerance Analysis. His books “The Journeyman’s Guide to Geometric Dimensioning and Tolerancing: GD&T for the New Millennium” now in its 12th revision, the GD&T Update Guide: ASME Y14.5-2009: Changes, Improvements, and Clarifications, and the GD&T Visual Glossary will be used as the basis for the seminar. His book “Mechanical Tolerance Stackup and Analysis,” now in its second edition (CRC Press 2011) is the preeminent title on Tolerance Stackups and Tolerance Analysis available.
In 2008 Bryan revised the 11th Edition of The IHS Global Drawing Requirements Manual (the DRM), and wrote an extensive new chapter on using Digital Data as Design Deliverables and Annotating Solid Models. This is a book in itself, and is based on the ASME Y14.41-2003 and ISO 16792-2006 standards, and includes material not found in either of those standards. We are leaders in 3D Model-Based Product Definition (3D MBD) and 3D Model-Based Enterprise (3D MBE) Implementation techniques training and consulting. Check out our Books and Materials section and our 3D PMI, MBD, and Advanced Applications of Solid Modeling Seminar and other 3D MBD and 3D MBE courses for more information.
3D Model-Based Product Definition [3D MBD], 3D Model-Based Process Definition, 3D Model-Based Enterprise [3D MBE], 3D Model-Based Business Process Optimization, 3D Product and Manufacturing Information, and 3D PMI Training & Consulting, 3D Software, and 3D Standards, including ASME Y14.41-2003, ASME Y14.41-2012, ISO 16792-2006, LOTAR, STEP AP242, 3D PDF, ASME Y14.100-2013, MIL-STD-31000A